HEXARC Manual
Tripper Modular · User manual

TRIPPER HEXARC

Six-voice euclidean sample sequencer

Version 1.0.0Formats AU · VST3 · StandalonemacOS 10.13+ · Windows 10/11November 2026
HEXARC running as a plug-in, synced to the host and playing the Techno preset

Overview

HEXARC is the software edition of the Tripper Euclidean Sequencer hardware: six circular sequencers, one master clock bus, a sample mixer and a touchscreen sound browser, on one panel.

Each sequencer spreads a number of hits as evenly as possible across 1 to 16 steps, the euclidean way. Rings of different lengths, offsets and clock sources run against each other and produce evolving polyrhythms from a handful of controls. In a DAW, HEXARC follows the project tempo and transport and plays its own samples on the instrument track.

Key features

System requirements

macOSWindows
FormatsAudio Unit, VST3, StandaloneVST3, Standalone
SystemmacOS 10.13 or later on Intel
macOS 11 or later on Apple Silicon
Windows 10 or 11, 64-bit
ProcessorIntel or Apple Silicon (universal binary)x64
Interface engineSystem WebKit, built into macOSMicrosoft Edge WebView2, built into Windows 10 and 11
Screen1600 × 904 recommended; the window scales down to fit smaller screens

HEXARC is an instrument with a stereo output and a MIDI output. It runs in any host that loads AU or VST3 instruments: Logic Pro, GarageBand, Ableton Live, Bitwig Studio, Cubase, Studio One, Reaper, FL Studio and others. Pro Tools (AAX) is not supported.

Installation

macOS installer (recommended)

  1. Open HEXARC-macOS-Installer.zip to extract HEXARC-macOS-Installer.pkg.

  2. Right-click the .pkg, choose Open, then Open again. HEXARC 1.0 is not notarised by Apple, so a plain double-click is blocked the first time.

  3. Follow the installer. Customise lets you choose the components; all three are selected by default.

  4. In Logic Pro, open Settings › Plug-in Manager, select HEXARC and click Reset & Rescan Selection if it does not appear straight away.

ComponentInstalled to
Audio Unit/Library/Audio/Plug-Ins/Components/HEXARC.component
VST3/Library/Audio/Plug-Ins/VST3/HEXARC.vst3
Standalone/Applications/HEXARC.app

macOS manual install

Copy HEXARC.component and HEXARC.vst3 into the folders above, or into the same folders in your user Library. Files copied by hand keep the download quarantine: run this once in Terminal, with the path where you copied the plug-in.

sudo xattr -dr com.apple.quarantine /Library/Audio/Plug-Ins/Components/HEXARC.component
sudo xattr -dr com.apple.quarantine /Library/Audio/Plug-Ins/VST3/HEXARC.vst3

Windows

  1. Extract HEXARC-Windows-VST3.zip.

  2. Copy the HEXARC.vst3 folder to C:\Program Files\Common Files\VST3\.

  3. Rescan plug-ins in your DAW. The standalone HEXARC.exe runs from any folder.

To uninstall, delete the files listed above on macOS, or the HEXARC.vst3 folder on Windows.

Quick start

HEXARC opens empty: every sequencer has 16 steps, no hits, no sound and its switch on Stop. A first groove takes six moves.

  1. Start playback in your DAW. With the clock switch on INT, or in the standalone application, click PLAY on the master board instead.

  2. In the touchscreen SOUNDS tab, drag a kick onto sequencer 1, the master. A single click on a sound only previews it.

  3. Turn the large aluminium knob in the centre of the ring to set the hits, for example 4.

  4. Flip the sequencer's Start/Stop switch to Start. The coloured LEDs show the pattern and the white LED follows the playhead.

  5. Do the same with a snare and a hi-hat on sequencers 2 and 3. Use Offset − / + to rotate a pattern, for example 2 hits with offset 4 for a backbeat.

  6. Balance the voices with the SAMPLE MIXER.

To hear a finished groove, click the PRESET display and choose a preset. Loading a preset switches every sequencer to Start.

Using HEXARC in your DAW

Press play in the DAW and every sequencer switched to Start follows the song position.

Master board in the plug-in, clock switch on HOST
The master board in a DAW: the BPM display follows the project tempo and the clock switch sits on HOST.

Loading

Insert HEXARC on an instrument track. In Logic Pro: AU Instruments › Tripper Modular › HEXARC. HEXARC needs no incoming notes; its sequencers make the rhythm.

Clock: HOST or INT

HOST (default)

Tempo and transport come from the DAW. Patterns stay aligned to the bar grid when playback starts mid-song; a loop or a jump in the timeline restarts them from step 1.

INT

HEXARC runs on its own Tempo knob. Press PLAY in HEXARC to start and stop, even while the DAW is stopped: handy for building patterns.

Sound, recording and export

All sound comes out on the instrument track, through the DAW's mixer, effects, automation and bounce. Exports and freezes include HEXARC. Each voice's Output setting chooses internal samples, MIDI or both.

MIDI to other instruments

Each sequencer sends its notes to the DAW on its own channel: sequencer 1 on channel 1 through sequencer 6 on channel 6, note C3 by default. Route HEXARC's MIDI output to another track to play it with a HEXARC rhythm: in Ableton Live set the track's MIDI From to HEXARC; in Bitwig, Reaper and Cubase use the track's MIDI input or a MIDI send. Logic Pro does not pass MIDI from instrument plug-ins to other tracks; there, use the internal samples.

Saving and window size

The project stores every setting and the audio of the six assigned samples, imported ones included, so it reopens and plays identically on another computer. The window opens at the native 1600 × 904, reduced only if the screen is smaller; drag its lower-right corner to resize it. The size is saved with the project.

The panel

The front panel has four areas. Clicking a sequencer module or a mixer strip selects that voice: it gets a coloured frame, and the touchscreen VOICE tab shows its settings.

Front panel with its four areas marked A to D A B C D

Sequencer modules

All six modules share the same layout. Module 1, the master, differs only in its source switch (STEP/CYCLE) and its middle jack (BUS).

Sequencer module 1 with its controls numbered 1 2 3 4 5 6 7 8 9 10 11
  1. 1

    OLED. Module name, MIDI channel, clock source and divider, sound, then steps / hits / offset. Shows ■STOP when stopped.

  2. 2

    Source switch. Modules 2–6: CLOCK or BUS. Master: STEP or CYCLE bus mode.

  3. 3

    Steps. Pattern length, 1 to 16.

  4. 4

    Div. Clock divider ÷1, ÷2, ÷3, ÷4, ÷6, ÷8; click a value in the list to jump to it.

  5. 5

    Offset − / +. Rotates the pattern one step at a time.

  6. 6

    Activity LEDs. INT once per cycle, STEPS on every step, PULSES on every hit played. On the master, BUS flashes on every bus pulse.

  7. 7

    Step ring. Coloured LED = hit, white = playhead. Click a step to toggle it by hand.

  8. 8

    Hits. Number of hits spread over the steps. The light ring flashes on every hit.

  9. 9

    Start / Stop. Runs or stops this sequencer; Stop silences it at once.

  10. 10

    Restart. Sends the playhead back to step 1 without changing anything.

  11. 11

    Reset. Clears the module back to its start-up state: pattern, sound, routing, mixer and voice settings, switch on Stop. MIDI routing is kept.

Manual step edits last until you change Steps, Hits or Offset, which recalculate the euclidean pattern.

Clock and master bus

Every sequencer advances on one shared step clock, either directly (CLOCK) or through the master's bus (BUS).

Internal clock (INT)Tempo knob + swing DAW transport (HOST)Project tempo + position Step clockone 16th note 1 · Master÷Div · Start/Stop Master busSTEP: on every hitCYCLE: on every step 1 CLOCK sequencers÷Div · Start/Stop BUS sequencers÷Div · Start/Stop pulses The INT / HOST switch selects one source

Step clock and swing

One step is a sixteenth note. Swing (0–50 %) delays every second step by that fraction of a step.

Divider

Div counts incoming pulses and advances one step every 1, 2, 3, 4, 6 or 8. At ÷4 a 16-step pattern lasts four bars. On the master, Div also slows the bus.

Master bus

The bus follows the master's pattern, not its sound: a muted master still drives the bus. A sequencer only moves when the transport runs and its own switch is on Start.

Sounds

HEXARC ships with 307 sounds synthesised inside the instrument, so nothing extra needs installing. They are generated the first time you use them, and level-matched by category so a full kit is balanced with every fader at the same position.

Kick34

808, 909, Techno, House, Trap, Gabber, Hardstyle, Dub, Acoustic, Industrial

Snare26

808, 909, 707, Crisp, Piccolo, Trap, Gated, Room, Dubstep, Rimshot

Clap16

808, 909, Big, Gospel, Trap, Room, Stack, Snap

Hi-Hat23

808 and 909 closed and open, Half Open, Sizzle, Metallic, Lo-Fi

Cymbal16

Crashes, Rides, Ride Bell, China, Splash, Gong, Swell

Tom18

Floor, Rack, 808, 909, Synth, Disco, Tribal, Roto

Perc37

Congas, Bongos, Timbale, Tabla, Djembe, Cajon, Guiro, Log Drum, Steel Pan

Bass32

808 variants, Acid, Reese, Wobble, Growl, Moog, Funk, Dub, Sub

Synth33

Stabs, Rave, Plucks, Harp, Koto, Leads, Hoover, Chords, Chip

Pad19

Choir, Air, Sweep, Shimmer, Strings, Drones, Lo-Fi

Bell21

FM Bells, Glock, Vibraphone, Celesta, Gamelan, Church Bell, Rhodes, Wurli

FX32

Risers, Downlifters, Impacts, Sub Drop, Tape Stop, Whoosh, Siren, Glitch

Touchscreen SOUNDS tab with category filters
SOUNDS tab: filter by category, click to preview, drag onto a module or a mixer strip.

Assigning a sound

  • Drag a sound onto a sequencer module or a mixer strip; the voice plays it once to confirm.
  • Or choose it in the menu at the top of the VOICE tab.
  • A click on a sound previews it; a new preview stops the previous one.

Your own samples

  • Drop audio files on a module or strip to load and assign them, or on the touchscreen to add them to the library. + IMPORT and the folder button do the same.
  • WAV, MP3, OGG and FLAC; up to 30 seconds per file. Imported sounds appear under Custom.
  • Assigned samples are saved inside the DAW project.

Mixer and voice settings

Each voice is shaped in two places: its strip in the SAMPLE MIXER for level, drive and sends, and the touchscreen VOICE tab for sound design and MIDI routing.

Sample mixer with six voice strips and the master strip
Sample mixer: Vol, Pan, Drive, Reverb and Delay per voice, M/S buttons, LED meters, MST master strip.
Strip controlFunction
VolVoice level; also sets the MIDI velocity
PanStereo position
DriveSoft saturation before the filter; level is compensated as it rises
ReverbSend to the voice's own reverb
DelaySend to the voice's own tempo-synced delay
M / SMute (silences at once) and solo
MSTMaster volume, into a gentle bus compressor
Touchscreen VOICE tab for voice 4
VOICE tab for the selected voice. The ▶ button auditions the voice.
VOICE controlFunction
Pitch±24 semitones; also changes the length
FilterLow-pass, 60 Hz to 20 kHz
LengthPlays 5–100 % of the sample, with a short fade
ProbabilityChance that each hit plays
Reverb size0.3 to 6 s decay
Delay time1/16 to 1/2, triplets and dotted values, synced to tempo
FeedbackDelay repeats, 0–90 %
OutputInternal, Int+MIDI or MIDI only
MIDI channel / noteOFF or 1–16; note 0–127

MIDI

Every hit that plays sends a Note On on the voice's channel, with a velocity that follows its volume (100 % = 127). The Note Off follows after 80 % of one step, divider included. Mute, solo, probability and the Start/Stop switch apply to MIDI exactly as to sound, and a voice with no sound still sends notes when its Output includes MIDI. Stopping the transport releases every held note.

In the plug-in, notes go to the DAW and tempo comes from the DAW. The browser edition of HEXARC adds a MIDI CLOCK IN port (24 PPQN, Start/Stop/Continue) and a MIDI OUT port menu; both are hidden in the plug-in.

Presets

Click the PRESET display to pick a preset, or step through them with ◀ ▶. A preset sets tempo, swing, bus mode, the six patterns, sounds and mix, and switches every sequencer to Start. The dice generates random lengths, hits and offsets and keeps sounds and mix.

PresetTempoSwingBusCharacter
Techno128 BPM0 %STEPFour-on-the-floor kick, acid bass, a 5-step stab driven by the master bus
Hip-Hop90 BPM30 %CYCLE808 kick and bass, fat snare, e-piano chords once per master cycle
Ambient84 BPM0 %CYCLESub kick, glass pad and vinyl on the bus, bells and kalimba on 11- and 13-step rings
Afro Perc112 BPM12 %STEPCongas, cowbell on 12 steps, shaker and clave
Electro118 BPM8 %STEPDistorted kick, FM bass, zap on the bus, chip blips with triplet delay

In a DAW, your own settings are saved with the project.

Controls reference

Every knob works the same way: drag up or down, use the mouse wheel, hold Shift for fine control, double-click for the default value. The value shows under the knob while you hover or turn it.

ParameterWhereRangeDefault
TempoMaster board40–240 BPM120 BPM
SwingMaster board0–50 %0 %
ClockMaster boardINT / HOSTHOST
StepsModule1–1616
HitsModule0 to Steps0
OffsetModule0 to Steps − 10
DivModule÷1, 2, 3, 4, 6, 8÷1
SourceModules 2–6CLOCK / BUSCLOCK
Bus modeMaster moduleSTEP / CYCLESTEP
VolMixer0–100 %80 %
PanMixerL100–R100Centre
DriveMixer0–100 %0 %
Reverb / Delay sendMixer0–100 %0 %
MasterMixer MST0–100 %80 %
PitchVOICE−24 to +24 st0 st
FilterVOICE60 Hz–20 kHz20 kHz
LengthVOICE5–100 %100 %
ProbabilityVOICE0–100 %100 %
Reverb sizeVOICE0.3–6 s2 s
Delay timeVOICE1/16–1/21/8
FeedbackVOICE0–90 %35 %
OutputVOICEInt / Int+MIDI / MIDIInt+MIDI
MIDI channelVOICEOFF, 1–16Module number
MIDI noteVOICE0–12760 (C3)

Tips and troubleshooting

Tips

Troubleshooting

SymptomWhat to check
Logic: “couldn't be opened”, or HEXARC missingmacOS 10.13+ on Intel, 11+ on Apple Silicon. Install with the .pkg, or remove the quarantine (Installation). Then Plug-in Manager › Reset & Rescan Selection.
macOS says the file is damaged or cannot be checkedHEXARC 1.0 is not notarised: right-click the installer › Open. For files copied by hand, run the xattr command from Installation.
No sound in the DAWHOST: start DAW playback. INT: press PLAY in HEXARC. At least one sequencer needs Start, hits above 0 and a sound.
One sequencer is silentIts switch is on Stop, it is muted, another voice is soloed, Probability is 0 %, or Output is MIDI only.
A BUS sequencer never movesThe master must be on Start with hits above 0. In CYCLE mode it moves once per master cycle.
Window too small or blankDrag the lower-right corner; the size is saved. On Windows, a blank window means the Microsoft Edge WebView2 Runtime is missing.
Basses sound weakSmall speakers cannot reproduce 40–60 Hz; check on headphones or monitors.
A sample is refusedImported samples are limited to 30 seconds.

Specifications

Voices6 sample voices, one per sequencer
Sequencers6 euclidean, 1–16 steps, offset, manual step edit
ClockHost tempo and transport, or internal 40–240 BPM; 16th-note steps; swing 0–50 %
Divider÷1, ÷2, ÷3, ÷4, ÷6, ÷8 per sequencer
Master busPulse on every hit (STEP) or every cycle (CYCLE)
Sounds307 built-in in 12 categories, level-matched; import WAV, MP3, OGG, FLAC up to 30 s
EffectsPer voice: drive, low-pass filter, reverb 0.3–6 s, tempo-synced delay with feedback; master compressor
MIDINote output to the host on 16 channels, one stream per sequencer
OutputStereo or mono
FormatsAudio Unit, VST3, Standalone; macOS 10.13+ Intel, 11+ Apple Silicon (universal); Windows 10/11 x64
StateSettings and sample audio saved with the project
Version1.0.0